Functions and advantages It is especially suitable for tiny data line of which diam eter is less than 0.5mm;
it won’t damage the copper core through high- precision control. They solve the problems above which is brought by traditional cutter. they can be operated continuously for a time;
floor-type design makes them steady and vibration-free.

Product applicationLaser peeler are suitable for peeling metal shielding layer, can be used for peeling off the shielding layer of flat cable of cell phone, notebook computer, DV, DC, E-dictionary and other micro electronic products after soldering. They can peel single cable, flat cable, parallel cables, multi-layer cable, etc..

Technical parametersLaser: CO2 / YAG
Light path structure: Fixed or two light paths
Movement structure: 2D worktable
Electrical source: 220VAC±10% 50Hz

System components and environmental requirements Software :AHLASER software , Support WIN98/WIN2000/WINXP
Installation Environment :It occupies an area of 5 square meters and should by put steadily.
Working environment : smoothly in a clean environment without vibrating or dirt in the air because the dirt will make the mirror dirty and reduce its lift sharply.
Temperature of the environment: 25℃―28℃
Humidity of the environment: 5% to 75% (no condensation)
Power supply: 220VAC ±5% 50HZalternating current capacity, it should be more than 6KW, has null line and separate earth wire which should be connected with the earth well. The circuit breaker should be set specially for the machine (C32) and it should equip with electric leaking protecting device.

Samples