MOULD LASER WELDING MACHINE

PrinciplesLaser mould welding machine is use the high energy of heat that instantaneously produced by laser to melt the special-purpose welding wire and connect it with the damaged parts of the mould , so it can connect with the original material firmly, after that there will form a refacing by electric spark and grind & cutting and some other processing and so the mould is repaired. Aohua developed special type of laser mould welding machine for mould industr y on the base of several years’experiences of laser welding development. It can repair tiny parts of the moulds such as blisters, crack, burst pieces and attrition precisely. It is widely used in the industries of mobile phone, digital, car and so on. It can repair all kinds of mould steel, beryllium copper, red copper and extremely hard alloy material. Small heat affected zone can avoid mould deformation. Deep welding makes the connection firm. Sufficiently melting leaves no repairing traces and no concave slot on the joint between raised part and matrix.

Functions and advantagesAohua laser has the most advanced technology strength: It is the first specialized researcher, producer and seller who developed laser mould repairing equipments.
We use imported products on the key parts so the perform ances are the same as the machine imported and some performances are even superior to imported machine. It’s more economical and suitable. The products are exported to some developed countries such as Japan and Europe.
widely scope of users: Aohua occupied more than 80% domestic market of mould welding repairing, numbers of machines export to Japan and Europe.
It is under the control of double closed loop by inside improved industrial controlling micro-computer so the stability and the running ability surpass similar products that controlled by monolithic integrated circuit. The laser controlling system can control the power source profile precisely pre-set optimized
Gas protecting system: synchronous argon protecting system controlled by micro-computer act better, it make the welding connection even firmer and artistic. Being controlled to keep synchronous transmission with laser can save the argon at the highest level.

Equipment such detailed information and downloadSystem components : optical path, cold water storage tanks, control cabinet, workstations,Optional Omni-directional worktable
Software :AHLASER MARKER SYSTEM, Support WIN98/WIN2000/WINXP
Supplies :Xenon lamps, filter, water, electricity
Installation Environment :It occupies an area of 10 square meters and should by put steadily.
Working environment : smoothly in a clean environment without vibrating or dirt in the air because the dirt will make the mirror dirty and reduce its lift sharply.
Temperature of the environment: 25℃―28℃
Humidity of the environment: 5% to 75% (no condensation)
Power supply: 220VAC ±5% 50HZalternating current capacity, it should be more than 9KW, has null line and separate earth wire which should be connected with the earth well. The circuit breaker should be set specially for the machine (C40) and it should equip with electric leaking protecting device.
Download：
Mould laser welder Series installation diagram. PDF Download
Mould laser welder Series installation guide early. PDF Download
Profiles and parameter of Mould laser welder series. PDF Download
Mould laser welder of products for routine maintenance. PDF Download
Mould laser welder series demonstration video files DEMO

Samples