---

---

Technical parametersMax. laser power: 12W
Laser wave-length: 10.64um
Repetition frequency: ≤50KHz
Standard marking area:100mm×100mm
Optional marking area: 50mmX50mm 150mm X150mm
Marking depth:≤3mm
Linear speed:≤7000mm/s
Min. line width: 0.1mm
Min. character size: 0.4mm
Repetition accuracy: ±0.01mm
Cooling system : air-cooled
Power consumed: ≤300W

---

System components and environmental requirements Software :AHLASER MARKER SYSTEM, Support WIN98/WIN2000/WINXP
Installation Environment :It occupies an area of 5 square meters and should by put steadily.
Working environment : smoothly in a clean environment without vibrating or dirt in the air because the dirt will make the mirror dirty and reduce its lift sharply.
Temperature of the environment: 25℃―28℃
Humidity of the environment: 5% to 75% (no condensation)
Power supply: 220VAC ±5% 50HZalternating current capacity, it should be more than 2KW, has null line and separate earth wire which should be connected with the earth well. The circuit breaker should be set specially for the machine (C10) and it should equip with electric leaking protecting device.

---

Samples