---

---

Technical parametersMax. laser power: 12W
Laser wave-length: 1064nm
Beam quality: <1.5M2
Repetition frequency: ≤50KHz
Standard marking area:100mm×100mm
Optional marking area: 50mmX50mm 150mm X150mm 200mm×200mm
Linear speed:≤7000mm/s
Min. line width:0.01mm
Repetition accuracy:±0.002mm
Electrical source:220V±10%/50Hz/10A

---

System components and environmental requirements Software :AHLASER MARKER SYSTEM, Support WIN98/WIN2000/WINXP
Installation Environment :It occupies an area of 5 square meters and should by put steadily.
Working environment : smoothly in a clean environment without vibrating or dirt in the air because the dirt will make the mirror dirty and reduce its lift sharply.
Temperature of the environment: 25℃―28℃
Humidity of the environment: 5% to 75% (no condensation)
Power supply: 220VAC ±5% 50HZalternating current capacity, it should be more than 2KW, has null line and separate earth wire which should be connected with the earth well. The circuit breaker should be set specially for the machine (C10) and it should equip with electric leaking protecting device.

---

Samples