Functions and advantagesLaser: It is equipped with original laser machine imported from America and discharge laser steady, so it’s seldom fall off and its life is as long as 25000 hours. The costof use and maintaining is very low.
Controlling computer: We use industrial controlling computer. It is superior to fam ily or commercial computer so it can ensure the equipment to work long-time and steadily in the industrial condition and will not easily crash.
Controlling software: It has strong capability .It can even the figures, laminate set up parameters and preview the place of infrared light. It can calculate the figures precisely and mark all kinds of bar codes , graphic code and mark on the opposite side.
Water cooling circulation system: It has body-separated structure to transpire the heat outside , so it can function in the environment without air conditioner and the operator can have a comfortable work environment.

Product applicationWood, paper, PVC, ABS, epoxy resin EP, PMMA, leather, glass, unsaturated polyester, etc. It’s also widely used in industries such as wood, foodstuffs, package, handicrafts, electronic components, clothes, leather and paper cutting.

Technical parametersMax. laser power: 50W
Laser wave-length: 10.64um
Repetition frequency: ≤50KHz
Standard marking area: 100mm×100mm
Marking area option: 150mm X150mm 200mm X200mm 300mmX300mm
Marking depth:≤7mm
Linear speed:≤7000mm/s
Min. line width: 0.15mm
Min. character size:0.4mm
Repetition accuracy: ±0.01mm
Cooling system : water-cooled
Power consumed:≤2 kW
Electrical source:220V±10%/50Hz/30A
Outline size standards by the real size
Optical system: 1200 mm×430 mm×1200 mm
Control system:560mm×660 mm×1000 mm

System components and environmental requirements system components : optical path[workstations], control cabinet, monitors, water cooling system
Software :AHLASER MARKER SYSTEM, Support WIN98/WIN2000/WINXP
Supplies :electricity
Installation Environment :It occupies an area of 10 square meters.
Working environment : smoothly in a clean environment without vibrating or dirt in the air because the dirt will make the mirror dirty and reduce its lift sharply.
Temperature of the environment: 25℃―28℃
Humidity of the environment: 5% to 75% (no condensation)
Power supply: 220VAC ±5% 50HZ alternating current capacity, it should be more than 2KW, has null line and separate earth wire which should be connected with the earth well. The circuit breaker should be set specially for the machine (C20) and it should equip with electric leaking protecting device.

Samples