Functions and advantagesThe system is integrate by the advanced end-face laser which made in America. It use Germanic resonance mirror, imported software and wind cooling system, so the equipment is steady, laser mode is choiceness, peak value power is high. It is the most excellent semiconductor laser machine in dom estic at present.
Controlling software: It has strong capability. It can even the figures, lam inate set up parameters and preview the place of infrared light.It can calculate the figures precisely and mark all kinds of bar codes and graphic code and mark on the opposite side.
The product is equipped with imported semiconductor laser reactor,It has small facula, high marking precision, steady and reliable facula and high speed. The effect of making is easy to debug and the consuming of power is little so the cost is low and it can do continual 24 hours full-load processing.
The software controlling system has the interface of WINDOWS and comprises files output by software such as CORELDRAW, AUTOCAD, PHOTOSHOP, etc. It can support graphic file formats such as PLT, PCX, DXF, BMP etc. and use fonts such as SHX, TTF directly It also can mark automatic code, sequence number, batch number, date, bar code and two-dimensional code. The software can mark the figures on the opposite side.

Product applicationIt can be used in the industries of metal, alloy and oxide, ABS, epoxy resin, printing ink, etc. Also it’s widely used in the industries such as electron components, electric appliance, jewels, glasses, hardware, car components, communication products, plastic keystroke and IC.

Technical parametersMax. laser power: 25W
Max.power of adjusting Q: 25W
Laser wave-length: 1064nm
Beam quality: <2M2
Adjusting Q frequency: ≤100KHz
Min. impu lse width of adjusting Q: 25ns
Standard marking area: 100mm×100mm
Marking area option: 50mmX50mm150mmX150mm 200mm×200mm 300mm×300mm
Marking depth: ≤1.8mm
Linear speed: ≤7000mm/s
Min. line width: 0.01mm
Min. character size: 0.1mm
Repetition accuracy: ±0.001mm
Max. laser power: ≤1.8KW
Electrical source: 220V±10%/50Hz/10A

System components and environmental requirementsSystem components : optical path, control cabinet, workstations
Software :AHLASER MARKER SYSTEM, Support WIN98/WIN2000/WINXP
Supplies :filter, water, electricity
Installation Environment :It occupies an area of 10 square meters and should by put steadily.
Working environment : smoothly in a clean environment without vibrating or dirt in the air because the dirt will make the mirror dirty and reduce its lift sharply.
Temperature of the environment: 25℃―28℃
Humidity of the environment: 5% to 75% (no condensation)
Power supply: 220VAC ±5% 50HZalternating current capacity, it should be more than 2KW, has null line and separate earth wire which should be connected with the earth well. The circuit breaker should be set specially for the machine (C32) and it should equip with electric leaking protecting device.

Samples